A JBoss Project
Red Hat

Posts tagged with 'release'

Happy to announce 4.5.3.AM3 (Developer Milestone 3) build for Eclipse Oxygen.3.

Downloads available at JBoss Tools 4.5.3 AM3.

What is New?

Full info is at this page. Some highlights are below.

OpenShift

CDK and Minishift Server Adapter runtime download

When working with both CDK and upstream Minishift, you needed to have previously downloaded the CDK or Minishift binary. It is now possible to download the runtime to a specific folder when you create the server adapter.

Let’s see an example with the CDK server adapter.

From the Servers view, select the new Server menu item and enter cdk in the filter:

cdk server adapter wizard

Select Red Hat Container Development Kit 3.2+

cdk server adapter wizard1

Click the Next button:

cdk server adapter wizard3

In order to download the runtime, click the Download and install runtime…​ link:

cdk server adapter wizard4

Select the version of the runtime you want to download

cdk server adapter wizard5

Click the Next button:

cdk server adapter wizard6

You need an account to download the CDK. If you already had configured credentials, select the one you want to use. If you didn’t, click the Add button to add your credentials.

cdk server adapter wizard7

Click the Next button. Your credentials will be validated, and upon success, you must accept the license agreement:

cdk server adapter wizard8

Accept the license agreement and click the Next button:

cdk server adapter wizard9

You can choose the folder where you want the runtime to be installed. Once you’ve set it, click the Finish button:

The download of the runtime will be started and you should see the progression on the server adapter wizard:

cdk server adapter wizard10

Once the download is completed, you will notice that the Minishift Binary and Username fields have been filled:

cdk server adapter wizard11

Click the Finish button to create the server adapter.

Please note that if it’s the first time you install CDK, you must perform an initialization. In the Servers view, right click the server and select the Setup CDK menu item:

cdk server adapter wizard12
cdk server adapter wizard13

Hibernate Tools

Hibernate Runtime Provider Updates

A number of additions and updates have been performed on the available Hibernate runtime providers.

New Hibernate 5.3 Runtime Provider

With beta releases available in the Hibernate 5.3 stream, the time was right to make available a corresponding Hibernate 5.3 runtime provider. This runtime provider incorporates Hibernate Core version 5.3.0.Beta2 and Hibernate Tools version 5.3.0.Beta1.

hibernate 5 3
Figure 1. Hibernate 5.3 is available
Other Runtime Provider Updates

The Hibernate 5.0 runtime provider now incorporates Hibernate Core version 5.0.12.Final and Hibernate Tools version 5.0.6.Final.

The Hibernate 5.1 runtime provider now incorporates Hibernate Core version 5.1.12.Final and Hibernate Tools version 5.1.7.Final.

The Hibernate 5.2 runtime provider now incorporates Hibernate Core version 5.2.15.Final and Hibernate Tools version 5.2.10.Final.

Fuse Tooling

Fuse Ignite Technical Extension templates

The existing template for "Custom step using a Camel Route" has been updated to work with Fuse 7 Tech Preview 4.

Two new templates have been added: - Custom step using Java Bean - Custom connector

New Fuse Ignite wizard with 3 options

Improvements of the wizard to create a Fuse Integration project

The creation wizard provides better guidance for the targeted deployment environment:

New Fuse Integration Project wizard page to select environment

More place is available to choose the templates and they are now filtered based on the targeted environment:

New Fuse Integration Project wizard page to select templates

It also points out to other places to find different examples for advanced users (see the link at the bottom of the previous screenshot).

Camel Rest DSL editor (Technical preview)

Camel is providing a Rest DSL to help the integration through Rest endpoints. Fuse Tooling is now providing a new tab in read-only mode to visualize the Rest endpoints defined.

Rest DSL editor tab in read-only mode

It is currently in Tech Preview and needs to be activated in Window → Preferences → Fuse Tooling → Editor → Enable Read Only Tech preview REST DSL tab.

Work is still ongoing and feedback is very welcome on this new feature, you can comment on this JIRA epic.

Dozer upgrade and migration

When upgrading from Camel < 2.20 to Camel > 2.20, the Dozer dependency has been upgraded to a version not backward-compatible If you open a Data transformation based on Dozer in Fuse Tooling, it will propose to migrate the file used for the transformation (technically changing the namespace). It allow to continue to use the Data Transformation editor and have - in most cases - the Data Transformation working at runtime with Camel > 2.20.

Enjoy!

Jeff Maury

Happy to announce 4.5.3.AM2 (Developer Milestone 2) build for Eclipse Oxygen.3.

Downloads available at JBoss Tools 4.5.3 AM2.

What is New?

Full info is at this page. Some highlights are below.

OpenShift

CDK and Minishift Server Adapter better developer experience

When working with both CDK and upstream Minishift, it is recommanded to distinguish environments through the MINISHIFT_HOME variable. It was possible before to use this parameter but it requires a two steps process:

  • first create the server adapter (through the wizard)

  • then change the MINISHIFT_HOME in the server adapter editor

It is now possible to set this parameter from the server adapter wizard. So now, everything is correctly setup when you create the server adapter.

Let’s see an example with the CDK server adapter.

From the Servers view, select the new Server menu item and enter cdk in the filter:

cdk server adapter wizard

Select Red Hat Container Development Kit 3.2+

cdk server adapter wizard1

Click the Next button:

cdk server adapter wizard2

The MINISHIFT_HOME parameter can be set here and is defaulted.

Fuse Tooling

Display Fuse version corresponding to Camel version proposed

When you create a new project, you select the Camel version from a list. Now, the list of Camel versions includes the Fuse version to help you choose the version that corresponds to your production version.

Fuse Version also displayed in drop-down list close to Camel version

Update validation for similar IDs between a component and its definition

Starting with Camel 2.20, you can use similar IDs for the component name and its definition unless the specific property "registerEndpointIdsFromRoute" is provided. The validation process checks the Camel version and the value of the "registerEndpointIdsFromRoute" property.

For example:

<from id="timer" uri="timer:timerName"/>

Improved guidance in method selection for factory methods on Global Bean

When selecting factory method on a Global bean, a lot of possibilities were proposed in the user interface. The list of factory methods for a global bean is now limited to only those methods that match the constraints of the bean’s global definition type (bean or bean factory).

Customize EIP labels in the diagram

The Fuse Tooling preferences page for the Editor view includes a new "Preferred Labels" option.

Fuse Tooling editor preference page

Use this option to define the label of EIP components (except endpoints) shown in the Editor’s Design view.

Dialog for defining the display text for an EIP

General

Credentials Framework

Sunsetting jboss.org credentials

Download Runtimes and CDK Server Adapter used the credentials framework to manage credentials. However, the JBoss.org credentials cannot be used any more as the underlying service used by these components does not support these credentials.

The credentials framework still supports the JBoss.org credentials in case other services / components require or use this credentials domain.

Aerogear

Aerogear component deprecation

The Aerogear component has been marked deprecated as there is no more maintenance on the source code. It is still available in Red Hat Central and may be removed in the future.

Arquillian

Arquillian component removal

The Arquillian component has been removed from Red Hat Central as it has been deprecated a while ago.

BrowserSim

BrowserSim component deprecation

The BrowserSim component has been marked deprecated as there is no more maintenance on the source code. It is still available in Red Hat Central and may be removed in the future.

Freemarker

Freemarker component removal

The Freemarker component has been removed from Red Hat Central as it has been deprecated a while ago.

LiveReload

LiveReload component deprecation

The LiveReload component has been marked deprecated as there is no more maintenance on the source code. It is still available in Red Hat Central and may be removed in the future.

Enjoy!

Jeff Maury

Try our complete Eclipse Oxygen and Red Hat JBoss Developer Studio 11 compatible integration tooling.

jbosstools jbdevstudio blog header

JBoss Tools Integration Stack 4.5.2.Final / Developer Studio Integration Stack 11.2.0.GA

All of the Integration Stack components have been verified to work with the same dependencies as JBoss Tools 4.5 and Developer Studio 11.

What’s new for this release?

This release provides full Teiid Designer tooling support for JBoss Data Virtualization 6.4 runtime. It provides an updated BPMN2 Modeler and jBPM/Drools for our Business Process Modeling friends. It also provides full synchronization with Devstudio 11.2.0.GA, JBoss Tools 4.5.2.Final and Eclipse Oxygen.2. Please note that SwitchYard is deprecated in this release.

Released Tooling Highlights

JBoss Business Process and Rules Development

BPMN2 Modeler Known Issues

See the BPMN2 1.4.2.Final Known Issues Section of the Integration Stack 11.2.0.GA release notes.

Drools/jBPM6 Known Issues

See the Drools 7.5.0.Final Known Issues Section of the Integration Stack 11.2.0.GA release notes.

SwitchYard Highlights

See the SwitchYard 2.4.1.Final Resolved Issues Section of the Integration Stack 11.2.0.GA release notes.

Data Virtualization Highlights

Teiid Designer

See the Teiid Designer 11.1.1.Final Resolved Issues Section of the Integration Stack 11.2.0.GA release notes.

What’s an Integration Stack?

Red Hat JBoss Developer Studio Integration Stack is a set of Eclipse-based development tools. It further enhances the IDE functionality provided by JBoss Developer Studio, with plug-ins specifically for use when developing for other Red Hat JBoss products. It’s where DataVirt Tooling, SOA tooling and BRMS tooling are aggregated. The following frameworks are supported:

JBoss Business Process and Rules Development

JBoss Business Process and Rules Development plug-ins provide design, debug and testing tooling for developing business processes for Red Hat JBoss BRMS and Red Hat JBoss BPM Suite.

  • BPEL Designer - Orchestrating your business processes.

  • BPMN2 Modeler - A graphical modeling tool which allows creation and editing of Business Process Modeling Notation diagrams using graphiti.

  • Drools - A Business Logic integration Platform which provides a unified and integrated platform for Rules, Workflow and Event Processing including KIE.

  • jBPM - A flexible Business Process Management (BPM) suite.

JBoss Data Virtualization Development

JBoss Data Virtualization Development plug-ins provide a graphical interface to manage various aspects of Red Hat JBoss Data Virtualization instances, including the ability to design virtual databases and interact with associated governance repositories.

  • Teiid Designer - A visual tool that enables rapid, model-driven definition, integration, management and testing of data services without programming using the Teiid runtime framework.

JBoss Integration and SOA Development

JBoss Integration and SOA Development plug-ins provide tooling for developing, configuring and deploying BRMS and SwitchYard to Red Hat JBoss Fuse and Fuse Fabric containers.

  • All of the Business Process and Rules Development plugins plus SwitchYard. Switchyard is deprecated as of this release.

  • Fuse Tooling has moved out of the Integration Stack to be a core part of JBoss Tools and Developer Studio.

The JBoss Tools website features tab

Don’t miss the Features tab for up to date information on your favorite Integration Stack components.

Installation

The easiest way to install the Integration Stack components is through the stand-alone installer or through our JBoss Tools Download Site.

For a complete set of Integration Stack installation instructions, see Integration Stack Installation Guide

Let us know how it goes!

Paul Leacu.

Happy to announce 4.5.3.AM1 (Developer Milestone 1) build for Eclipse Oxygen.2.

Downloads available at JBoss Tools 4.5.3 AM1.

What is New?

Full info is at this page. Some highlights are below.

OpenShift

Minishift Server Adapter

A new server adapter has been added to support upstream Minishift. While the server adapter itself has limited functionality, it is able to start and stop the Minishift virtual machine via its minishift binary. From the Servers view, click New and then type minishift, that will bring up a command to setup and/or launch the Minishift server adapter.

minishift server adapter

All you have to do is set the location of the minishift binary file, the type of virtualization hypervisor and an optional Minishift profile name.

minishift server adapter1

Once you’re finished, a new Minishift Server adapter will then be created and visible in the Servers view.

minishift server adapter2

Once the server is started, Docker and OpenShift connections should appear in their respective views, allowing the user to quickly create a new Openshift application and begin developing their AwesomeApp in a highly-replicatable environment.

minishift server adapter3
minishift server adapter4

Fuse Tooling

New shortcuts in Fuse Integration perspective

Shortcuts for the Java, Launch, and Debug perspectives and basic navigation operations are now provided within the Fuse Integration perspective.

The result is a set of buttons in the Toolbar:

New Toolbar action

All of the associated keyboard shortcuts are also available, such as Ctrl+Shift+T to open a Java Type.

Performance improvement: Loading Advanced tab for Camel Endpoints

The loading time of the "Advanced" tab in the Properties view for Camel Endpoints is greatly improved.

Advanced Tab in Properties view

Previously, in the case of Camel Components that have a lot of parameters, it took several seconds to load the Advanced tab. For example, for the File component, it would take ~3.5s. It now takes ~350ms. The load time has been reduced by a factor of 10. (See this interesting article on response time)

If you notice other places showing slow performance, you can file a report by using the Fuse Tooling issue tracker. The Fuse Tooling team really appreciates your help. Your feedback contributes to our development priorities and improves the Fuse Tooling user experience.

Enjoy!

Jeff Maury

JBoss Tools 4.5.2 and Red Hat JBoss Developer Studio 11.2 for Eclipse Oxygen.2 are here waiting for you. Check it out!

devstudio11

Installation

JBoss Developer Studio comes with everything pre-bundled in its installer. Simply download it from our JBoss Products page and run it like this:

java -jar jboss-devstudio-<installername>.jar

JBoss Tools or Bring-Your-Own-Eclipse (BYOE) JBoss Developer Studio require a bit more:

This release requires at least Eclipse 4.7 (Oxygen) but we recommend using the latest Eclipse 4.7.2 Oxygen JEE Bundle since then you get most of the dependencies preinstalled.

Once you have installed Eclipse, you can either find us on the Eclipse Marketplace under "JBoss Tools" or "Red Hat JBoss Developer Studio".

For JBoss Tools, you can also use our update site directly.

http://download.jboss.org/jbosstools/oxygen/stable/updates/

What is new?

Our main focus for this release was on adoption of Java9, improvements for container based development and bug fixing. Eclipse Oxygen itself has a lot of new cool stuff but let me highlight just a few updates in both Eclipse Oxygen and JBoss Tools plugins that I think are worth mentioning.

OpenShift 3

Spring Boot applications support in OpenShift server adapter

The OpenShift server adapter allowed hotdeploy and debugging for JEE and NodeJS based applications. It now supports Spring Boot applications with some limitations: the Spring Boot devtools module must be added to your application as it monitors code changes and as the application must be launched in exploded mode, you must use the upstream image (docker.io/fabric8/s2i-java) rather than the downstream image builder fis-java-openshift.

As an example, we’ve provided an OpenShift template that will create an OpenShift application based on the upstream application and a Git repository that added the Spring Boot devtools to the Fabric8 Spring Boot quickstart.

{
  "apiVersion": "v1",
  "kind": "Template",
  "metadata": {
    "annotations": {
      "description": "Spring-Boot and CXF JAXRS QuickStart. This example demonstrates how you can use Apache CXF JAXRS with Spring Boot on Openshift. The quickstart uses Spring Boot to configure a little application that includes a CXF JAXRS endpoint with Swagger enabled.",
      "tags": "quickstart,java,springboot,fis",
      "iconClass": "icon-jboss",
      "version": "2.0"
    },
    "name": "s2i-spring-boot-cxf-jaxrs"
  },
  "labels": {
    "template": "s2i-spring-boot-cxf-jaxrs"
  },
  "parameters": [
    {
      "name": "APP_NAME",
      "displayName": "Application Name",
      "required": true,
      "value": "s2i-spring-boot-cxf-jaxrs",
      "description": "The name assigned to the application."
    },
    {
      "name": "GIT_REPO",
      "displayName": "Git Repository URL",
      "required": true,
      "value": "https://github.com/jeffmaury/spring-boot-cxf-jaxrs.git",
      "description": "The URL of the repository with your application source code."
    },
    {
      "name": "GIT_REF",
      "displayName": "Git Reference",
      "value": "hotdeploy",
      "description": "Set this to a branch name, tag or other ref of your repository if you are not using the default branch."
    },
    {
      "name": "SERVICE_NAME",
      "displayName": "Service Name",
      "value": "cxf-jaxrs",
      "description": "Exposed service name."
    },
    {
      "name": "BUILDER_VERSION",
      "displayName": "Builder version",
      "value": "2.0",
      "description": "The version of the FIS S2I builder image to use."
    },
    {
      "name": "APP_VERSION",
      "displayName": "Application Version",
      "value": "1.0.0.redhat-000014",
      "description": "The application version."
    },
    {
      "name": "MAVEN_ARGS",
      "displayName": "Maven Arguments",
      "value": "package -DskipTests -Dfabric8.skip -e -B",
      "description": "Arguments passed to mvn in the build."
    },
    {
      "name": "MAVEN_ARGS_APPEND",
      "displayName": "Extra Maven Arguments",
      "description": "Extra arguments passed to mvn, e.g. for multi-module builds."
    },
    {
      "name": "ARTIFACT_DIR",
      "displayName": "Maven build directory",
      "description": "Directory of the artifact to be built, e.g. for multi-module builds."
    },
    {
      "name": "IMAGE_STREAM_NAMESPACE",
      "displayName": "Image Stream Namespace",
      "value": "openshift",
      "required": true,
      "description": "Namespace in which the Fuse ImageStreams are installed. These ImageStreams are normally installed in the openshift namespace. You should only need to modify this if you've installed the ImageStreams in a different namespace/project."
    },
    {
      "name": "BUILD_SECRET",
      "displayName": "Git Build Secret",
      "generate": "expression",
      "description": "The secret needed to trigger a build.",
      "from": "[a-zA-Z0-9]{40}"
    },
    {
      "name": "CPU_REQUEST",
      "displayName": "CPU request",
      "value": "0.2",
      "required": true,
      "description": "The amount of CPU to requests."
    },
    {
      "name": "CPU_LIMIT",
      "displayName": "CPU limit",
      "value": "1.0",
      "required": true,
      "description": "The amount of CPU the container is limited to use."
    }
  ],
  "objects": [
    {
      "apiVersion": "v1",
      "kind": "Route",
      "metadata": {
        "labels": {
          "component": "${APP_NAME}",
          "provider": "s2i",
          "project": "${APP_NAME}",
          "version": "${APP_VERSION}",
          "group": "quickstarts"
        },
        "name": "${SERVICE_NAME}-route"
      },
      "spec": {
        "to": {
          "kind": "Service",
          "name": "${SERVICE_NAME}"
        }
      }
    },
    {
      "apiVersion": "v1",
      "kind": "Service",
      "metadata": {
        "annotations": {
        },
        "labels": {
          "component": "${APP_NAME}",
          "provider": "s2i",
          "project": "${APP_NAME}",
          "version": "${APP_VERSION}",
          "group": "quickstarts"
        },
        "name": "${SERVICE_NAME}"
      },
      "spec": {
        "clusterIP": "None",
        "deprecatedPublicIPs": [],
        "ports": [
          {
            "port": 9413,
            "protocol": "TCP",
            "targetPort": 8080
          }
        ],
        "selector": {
          "project": "${APP_NAME}",
          "component": "${APP_NAME}",
          "provider": "s2i",
          "group": "quickstarts"
        }
      }
    },
    {
      "kind": "ImageStream",
      "apiVersion": "v1",
      "metadata": {
        "name": "${APP_NAME}",
        "creationTimestamp": null,
        "labels": {
          "component": "${APP_NAME}",
          "group": "quickstarts",
          "project": "${APP_NAME}",
          "provider": "s2i",
          "version": "${APP_VERSION}"
        }
      },
      "spec": {},
      "status": {
        "dockerImageRepository": ""
      }
    },
    {
      "kind": "BuildConfig",
      "apiVersion": "v1",
      "metadata": {
        "name": "${APP_NAME}",
        "creationTimestamp": null,
        "labels": {
          "component": "${APP_NAME}",
          "group": "quickstarts",
          "project": "${APP_NAME}",
          "provider": "s2i",
          "version": "${APP_VERSION}"
        }
      },
      "spec": {
        "triggers": [
          {
            "type": "GitHub",
            "github": {
              "secret": "${BUILD_SECRET}"
            }
          },
          {
            "type": "Generic",
            "generic": {
              "secret": "${BUILD_SECRET}"
            }
          },
          {
            "type": "ConfigChange"
          },
          {
            "type": "ImageChange",
            "imageChange": {}
          }
        ],
        "source": {
          "type": "Git",
          "git": {
            "uri": "${GIT_REPO}",
            "ref": "${GIT_REF}"
          }
        },
        "strategy": {
          "type": "Source",
          "sourceStrategy": {
            "from": {
              "kind": "DockerImage",
              "name": "fabric8/s2i-java:${BUILDER_VERSION}"
            },
            "forcePull": true,
            "incremental": true,
            "env": [
              {
                "name": "BUILD_LOGLEVEL",
                "value": "5"
              },
              {
                "name": "ARTIFACT_DIR",
                "value": "${ARTIFACT_DIR}"
              },
              {
                "name": "MAVEN_ARGS",
                "value": "${MAVEN_ARGS}"
              },
              {
                "name": "MAVEN_ARGS_APPEND",
                "value": "${MAVEN_ARGS_APPEND}"
              }
            ]
          }
        },
        "output": {
          "to": {
            "kind": "ImageStreamTag",
            "name": "${APP_NAME}:latest"
          }
        },
        "resources": {}
      },
      "status": {
        "lastVersion": 0
      }
    },
    {
      "kind": "DeploymentConfig",
      "apiVersion": "v1",
      "metadata": {
        "name": "${APP_NAME}",
        "creationTimestamp": null,
        "labels": {
          "component": "${APP_NAME}",
          "group": "quickstarts",
          "project": "${APP_NAME}",
          "provider": "s2i",
          "version": "${APP_VERSION}"
        }
      },
      "spec": {
        "strategy": {
          "resources": {}
        },
        "triggers": [
          {
            "type": "ConfigChange"
          },
          {
            "type": "ImageChange",
            "imageChangeParams": {
              "automatic": true,
              "containerNames": [
                "${APP_NAME}"
              ],
              "from": {
                "kind": "ImageStreamTag",
                "name": "${APP_NAME}:latest"
              }
            }
          }
        ],
        "replicas": 1,
        "selector": {
          "component": "${APP_NAME}",
          "deploymentconfig": "${APP_NAME}",
          "group": "quickstarts",
          "project": "${APP_NAME}",
          "provider": "s2i",
          "version": "${APP_VERSION}"
        },
        "template": {
          "metadata": {
            "creationTimestamp": null,
            "labels": {
              "component": "${APP_NAME}",
              "deploymentconfig": "${APP_NAME}",
              "group": "quickstarts",
              "project": "${APP_NAME}",
              "provider": "s2i",
              "version": "${APP_VERSION}"
            }
          },
          "spec": {
            "containers": [
              {
                "name": "${APP_NAME}",
                "image": "library/${APP_NAME}:latest",
                "readinessProbe" : {
                  "httpGet" : {
                    "path" : "/health",
                    "port" : 8081
                  },
                  "initialDelaySeconds" : 10
                },
                "livenessProbe" : {
                  "httpGet" : {
                    "path" : "/health",
                    "port" : 8081
                  },
                  "initialDelaySeconds" : 180
                },
                "ports": [
                  {
                    "containerPort": 8778,
                    "name": "jolokia"
                  }
                ],
                "env" : [ {
                  "name" : "KUBERNETES_NAMESPACE",
                  "valueFrom" : {
                    "fieldRef" : {
                      "fieldPath" : "metadata.namespace"
                    }
                  }
                } ],
                "resources": {
                  "requests": {
                    "cpu": "${CPU_REQUEST}"
                  },
                  "limits": {
                    "cpu": "${CPU_LIMIT}"
                  }
                }
              }
            ]
          }
        }
      },
      "status": {}
    }
  ]
}

You can see a demo of the OpenShift server adapter for Spring Boot application here:

Support for route timeouts and liveness probe for OpenShift Server Adapter debugging configurations

While debugging your OpenShift deployment, you may face two different issues:

  • if you launch your test through a Web browser, then it’s likely that you will access your OpenShift deployment through an OpenShift route. The problem is that, by default, OpenShift routes have a 30 seconds timeout for each request. So if you’re stepping through one of your breakpoints, you will get a timeout error message in the browser window even if you can still debug your OpenShift deployment. And you’re now stuck will the navigation of your OpenShift application.

  • if your OpenShift deployment has a liveness probe configured, depending on your virtual machine capabilities or how your debugger is configured, if your stepping into one of your breakpoints, the liveness probe may fail thus OpenShift so OpenShift will restart your container and your debugging session will be destroyed.

So, from now, when the OpenShift server adapter is started in debug mode, the following action are being performed:

  • if an OpenShift route is found that is linked to the OpenShift deployment you want to debug, the route timeout will be set or increased to 1 hour. The original or default value will be restored when the OpenShift server adapter will be restarted in run mode.

  • if your OpenShift deployment has a liveness probe configured, the initialDelay field will be increased to 1 hour if the defined value for this field is lower than 1 hour. If the value of this field is defined to a value greater than 1 hour, it is left intact. The original value will be restored when the OpenShift server adapter will be restarted in run mode

Enhanced command to delete resource(s)

When it comes to delete OpenShift resources, you had two different choices:

  • individually delete each resource but as some resources are hidden by the OpenShift explorer, it may become troublesome

  • delete the containing OpenShift project but you are then deleting more resources than required

There is now a new enhanced command to delete resources. It is available at the OpenShift project level and it will first list all the available OpenShift resources for the selected OpenShift project. You can now select the ones you want to delete and you can also filter the list using a filter that will be applied to the labels for each retrieved OpenShift resource.

So if you have two different deployments in a single OpenShift project (if you using OpenShift Online Starter for example) or if you have different kind of resources in a single deployment, you can now distinct them.

Let’s see this in action:

In this example, I have deployed an EAP6.4 based application and an EAP7.0 based one. Here is what you can see from the OpenShift explorer:

new delete resources explorer

Now, let’s invoke the new delete command on the eap OpenShift project: right click the OpenShift project and select Delete Resources…​:

new delete resources dialog

Let suppose that we want to delete the EAP6.4 deployement. Enter eap=6.4 in the filter field:

new delete resources dialog1

Push the Select All button:

new delete resources dialog2

Close this dialog by pushing the OK button. The resources will be deleted and the OpenShift explorer will be updated accordingly:

new delete resources explorer1

Server tools

EAP 7.1 Server Adapter

A server adapter has been added to work with EAP 7.1 and Wildfly 11. It’s based on WildFly 11. This new server adapter includes support for incremental management deployment like it’s upstream WildFly 11 counterpart.

Fuse Tooling

Fuse 7 Karaf-based runtime Server adapter

Fuse 7 is cooking and preliminary versions are already available on early-access repository. Fuse Tooling is ready to leverage them so that you can try the upcoming major Fuse version.

Fuse 7 Server Adapter

Classical functionalities with server adapters are available: automatic redeploy, Java debug, Graphical Camel debug through created JMX connection. Please note: - you can’t retrieve the Fuse 7 Runtime yet directly from Fuse tooling, it is required to download it on your machine and point to it when creating the Server adapter. - the provided templates requires some modifications to have them working with Fuse 7, mainly adapting the bom. Please see work related to it in this JIRA task and its children.

Display routes defined inside "routeContext" in Camel Graphical Editor (Design tab)

"routeContext" tag is a special tag used in Camel to provide the ability to reuse routes and to split them across different files. This is very useful on large projects. See Camel documentation for more information. Since this version, the Design of the routes defined in "routeContext" tags are now displayed.

Usability improvement: Progress bar when "Changing the Camel version"

Since Fuse Tooling 10.1.0, it is possible to change the Camel version. In case the Camel version was not cached locally yet and for slow internet connections, this operation can take a while. There is now a progress bar to see the progress.

Switch Camel Version with Progress Bar

Support for creating Fuse Ignite Technical Extensions

We are happy to announce the addition of support for creating Technical Extension projects for Fuse Ignite*. That includes the creation of the project using the "New Fuse Ignite Extension Project" wizard as well as support for building the deployable artifact directly from inside the Eclipse environment.

*Fuse Ignite is a JBoss Fuse feature that provides a web interface for integrating applications. Without writing code, a business expert can use Ignite to connect to applications and optionally operate on data between connections to different applications. In Ignite, a data operation is referred to as a step in an integration. Ignite provides steps for operations such as filtering and mapping data. To operate on data in ways that are not provided by Ignite built-in steps, you can develop an Ignite extension to define one or more custom steps. Fuse Ignite comes as part of Fuse and Fuse Online. Please refer to the online documentation for more information on how to create and configure technical extensions for Fuse Ignite.

Fuse Ignite Technical Extension Wizard

The provided project template allows you to define an Apache Camel route as the base flow of your new technical extension.

Fuse Ignite Technical Extension Route

To configure your new technical extension you can use the JSON file created with the new project.

Fuse Ignite Technical Extension Configuration

Forge Tools

Forge Runtime updated to 3.8.1.Final

The included Forge runtime is now 3.8.1.Final. Read the official announcement here.

And more…​

You can find more noteworthy updates in on this page.

What is next?

Having JBoss Tools 4.5.2 and Developer Studio 11.2 out we are already working on the next maintenance release for Eclipse Oxygen.

Enjoy!

Jeff Maury

We are happy to announce the latest release of the Red Hat Application Migration Toolkit (RHAMT) Eclipse Plugin.

Getting Started

It is now available through JBoss Central, and from the update site here.

What is RHAMT?

RHAMT is an automated application migration and assessment tool.

Example ways to RHAMT up your code:

  • Moving your application from WebLogic to EAP, or WebSphere to EAP

  • Version upgrade from Hibernate 3 to Hibernate 4, or EAP 6 to EAP 7

  • Change UI technologies from Seam 2 to pure JSF 2.

An example of how to run the RHAMT CLI:

$ ./rhamt-cli --input /path/to/jee-example-app-1.0.0.ear --output /path/to/output --source weblogic --target eap:7

The output is a report used to assess and prioritize migration and modernization efforts.

The RHAMT Eclipse Plugin - What does it do?

Consider an application migration comprised of thousands of files, with a myriad of small changes, not to mention the tediousness of switching between the report and your IDE. Who wants to be the engineer assigned to that task? :) Instead, this tooling marks the source files containing issues, making it easy to organize, search, and in many cases automatically fix issues using quick fixes.

Let me give you a quick walkthrough.

Ruleset Wizard

We now have quickstart template code generators.

Rueset Wizard

Rule Creation From Code

We have also added rule generators for selected snippets of code.

Rule Generation From Source

Ruleset Graphical Editor

Ruleset navigation and editing is faster and more intuitive thanks to the new graphical editor.

Graphical Editor

Ruleset View

We have created a view dedicated to the management of rulesets. Default rulesets shipped with RHAMT can now be opened, edited, and referenced while authoring your own custom rulesets.

Ruleset View

Run Configuration

The Eclipse plugin interacts with the RHAMT CLI process, thereby making it possible to specify command line options and custom rulesets.

Run Configuration

Ruleset Submission

Lastly, contribute your custom rulesets back to the community from within the IDE.

Ruleset Submission


You can find more detailed information here.

Our goal is to make the RHAMT tooling easy to use. We look forward to your feedback and comments!

Have fun!
John Steele
github/johnsteele

Happy to announce 4.5.2.AM2 (Developer Milestone 2) build for Eclipse Oxygen.2 (built with RC2).

Downloads available at JBoss Tools 4.5.2 AM2.

What is New?

Full info is at this page. Some highlights are below.

Fuse Tooling

Fuse 7 Karaf-based runtime Server adapter

Fuse 7 is cooking and preliminary versions are already available on early-access repository. Fuse Tooling is ready to leverage them so that you can try the upcoming major Fuse version.

Fuse 7 Server Adapter

Classical functionalities with server adapters are available: automatic redeploy, Java debug, Graphical Camel debug through created JMX connection. Please note: - you can’t retrieve the Fuse 7 Runtime yet directly from Fuse tooling, it is required to download it on your machine and point to it when creating the Server adapter. - the provided templates requires some modifications to have them working with Fuse 7, mainly adapting the bom. Please see work related to it in this JIRA task and its children.

Display routes defined inside "routeContext" in Camel Graphical Editor (Design tab)

"routeContext" tag is a special tag used in Camel to provide the ability to reuse routes and to split them across different files. This is very useful on large projects. See Camel documentation for more information. Since this version, the Design of the routes defined in "routeContext" tags are now displayed.

Usability improvement: Progress bar when "Changing the Camel version"

Since Fuse Tooling 10.1.0, it is possible to change the Camel version. In case the Camel version was not cached locally yet and for slow internet connections, this operation can take a while. There is now a progress bar to see the progress.

Switch Camel Version with Progress Bar

Enjoy!

Jeff Maury

Happy to announce 4.5.2.AM1 (Developer Milestone 1) build for Eclipse Oxygen.1a.

Downloads available at JBoss Tools 4.5.2 AM1.

What is New?

Full info is at this page. Some highlights are below.

OpenShift

Support for route timeouts and liveness probe for OpenShift Server Adapter debugging configurations

While debugging your OpenShift deployment, you may face two different issues:

  • if you launch your test through a Web browser, then it’s likely that you will access your OpenShift deployment through an OpenShift route. The problem is that, by default, OpenShift routes have a 30 seconds timeout for each request. So if you’re stepping through one of your breakpoints, you will get a timeout error message in the browser window even if you can still debug your OpenShift deployment. And you’re now stuck will the navigation of your OpenShift application.

  • if your OpenShift deployment has a liveness probe configured, depending on your virtual machine capabilities or how your debugger is configured, if your stepping into one of your breakpoints, the liveness probe may fail thus OpenShift so OpenShift will restart your container and your debugging session will be destroyed.

So, from now, when the OpenShift server adapter is started in debug mode, the following action are being performed:

  • if an OpenShift route is found that is linked to the OpenShift deployment you want to debug, the route timeout will be set or increased to 1 hour. The original or default value will be restored when the OpenShift server adapter will be restarted in run mode.

  • if your OpenShift deployment has a liveness probe configured, the initialDelay field will be increased to 1 hour if the defined value for this field is lower than 1 hour. If the value of this field is defined to a value greater than 1 hour, it is left intact. The original value will be restored when the OpenShift server adapter will be restarted in run mode

Fuse Tooling

Camel context parameters configurable in properties view for Camel version < 2.18

Before Camel 2.18, the Camel catalog is missing information about Camel Context. Fuse Tooling is now providing this missing piece of information and thus allow to edit Camel Context parameters in Properties view like for any other component. It is activated when there is no element selected on the diagram.

Parameters in Properties view for Camel context

Usability improvement: Progress bar when "Changing the Camel version"

Since Fuse Tooling 10.1.0, it is possible to change the Camel version. In case the Camel version was not cached locally yet and for slow internet connections, this operation can take a while. There is now a progress bar to see the progress.

Switch Camel Version with Progress Bar

Enjoy!

Jeff Maury

JBoss Tools 4.5.1 and Red Hat JBoss Developer Studio 11.1 for Eclipse Oxygen.1a are here waiting for you. Check it out!

devstudio11

Installation

JBoss Developer Studio comes with everything pre-bundled in its installer. Simply download it from our JBoss Products page and run it like this:

java -jar jboss-devstudio-<installername>.jar

JBoss Tools or Bring-Your-Own-Eclipse (BYOE) JBoss Developer Studio require a bit more:

This release requires at least Eclipse 4.7 (Oxygen) but we recommend using the latest Eclipse 4.7.1a Oxygen JEE Bundle since then you get most of the dependencies preinstalled.

Once you have installed Eclipse, you can either find us on the Eclipse Marketplace under "JBoss Tools" or "Red Hat JBoss Developer Studio".

For JBoss Tools, you can also use our update site directly.

http://download.jboss.org/jbosstools/oxygen/stable/updates/

What is new?

Our main focus for this release was on adoption of Java9, improvements for container based development and bug fixing. Eclipse Oxygen itself has a lot of new cool stuff but let me highlight just a few updates in both Eclipse Oxygen and JBoss Tools plugins that I think are worth mentioning.

OpenShift 3

CDK 3.2 Server Adapter

A new server adapter has been added to support the next generation of CDK 3.2. While the server adapter itself has limited functionality, it is able to start and stop the CDK virtual machine via its minishift binary. Simply hit Ctrl+3 (Cmd+3 on OSX) and type CDK, that will bring up a command to setup and/or launch the CDK server adapter. You should see the old CDK 2 server adapter along with the new CDK 3 one (labeled Red Hat Container Development Kit 3.2+ ).

cdk3.2 server adapter

All you have to do is set the credentials for your Red Hat account, the location of the CDK’s minishift binary file, the type of virtualization hypervisor and an optional CDK profile name.

cdk3.2 server adapter1

Once you’re finished, a new CDK Server adapter will then be created and visible in the Servers view.

cdk3.2 server adapter2

Once the server is started, Docker and OpenShift connections should appear in their respective views, allowing the user to quickly create a new Openshift application and begin developing their AwesomeApp in a highly-replicatable environment.

cdk3.2 server adapter3
cdk3.2 server adapter4

New command to tune resource limits

A new command has been added to tune resource limits (CPU, memory) on an OpenShift deployment. It’s available for a Service, a DeploymentConfig, a ReplicationController or a Pod.

To activate it, go the the OpenShift explorer, select the OpenShift resource, right click and select Edit resource limits. The following dialog will show up:

edit resource limits

After you changed the resource limits for this deployment, it will be updated and new pods will be spawned (not for ReplicationController)

edit resource limits1

Discover Docker registry URL for OpenShift connections

When an OpenShift connection is created, the Docker registry URL is empty. When the CDK is started through the CDK server adapter, an OpenShift connection is created or updated if a matching OpenShift connection is found. But what if you have several OpenShift connections, the remaining ones will be left with the empty URL.

You can find the matching Docker registry URL when editing the OpenShift connection through the Discover button:

edit connection discover

Click on the Discover button and the Docker registry URL will be filled if a matching started CDK server adapter is found:

edit connection discover1

OpenShift.io login

It is possible to login from JBoss Tools to OpenShift.io. A single account will be maintained per workspace. Once you initially logged onto OpenShift.io, all needed account information (tokens,…​) will be stored securely.

There are two ways to login onto OpenShift.io:

  • through the UI

  • via a third party service that will invoke the proper extension point

UI based login to OpenShift.io

In the toobar, you should see a new icon Toolbar. Click on it and it will launch the login.

If this is the first time you login to OpenShift.io or if you OpenShift.io account tokens are not valid anymore, you should see a browser launched with the following content:

osio browser

Enter your RHDP login and the browser will then auto-close and an extract (for security reasons) of the OpenShift.io token will be displayed:

osio token dialog

This dialog will be also shown if an OpenShift.io account was configured in the workspace and the account information is valid.

Via extension point

The OpenShift.io integration can be invoked by a third party service through the org.jboss.tools.openshift.io.code.tokenProvider extension point. This extension point will perform the same actions as the UI but basically will return an access token for OpenShift.io to the third party service. A detailed explanation of how to use this extension point is described here: Wiki page

You can display the account information using the Eclipse Jboss Tools → OpenShift.io preference node. If you workspace does not contain an OpenShift.io account yet, you should see the following:

osio preferences

If you have a configured OpenShift.io account, you should see this:

osio preferences1

Server tools

EAP 7.1 Server Adapter

A server adapter has been added to work with EAP 7.1 and Wildfly 11. It’s based on WildFly 11. This new server adapter includes support for incremental management deployment like it’s upstream WildFly 11 counterpart.

Fuse Tooling

Global Beans: improve support for Bean references

It is now possible to set Bean references from User Interface when creating a new Bean:

Create Factory Bean Reference

Editing Bean references is also now available on the properties view when editing an existing Bean:

Edit Factory Bean Reference

Additional validation has been added to help users avoid mixing Beans defined with class names and Beans defined referencing other beans.

Apache Karaf 4.x Server Adapter

We are happy to announce the addition of new Apache Karaf server adapters. You can now download and install Apache Karaf 4.0 and 4.1 from within your development environment.

Apache Karaf 4x Server Adapters

Switch Apache Camel Version

You can now change the Apache Camel version used in your project. To do that you invoke the context menu of the project in the project explorer and navigate into the Configure menu. There you will find the menu entry called Change Camel Version which will guide you through this process.

Switch Camel Version

Improved Validation

The validation in the editor has been improved to find containers which lack mandatory child elements. (for instance a Choice without a child element)

Improved validation

Java Developement Tools (JDT)

Support for Java™ 9

Java™ 9 is here, and JDT fully supports it:

  • The Eclipse compiler for Java (ECJ) implements all the new Java 9 language enhancements

  • Updated significant features to support Java Modules, such as compiler, search and many editor features.

It is not mandatory to run Eclipse with Java Runtime 9 to get the Java 9 support. However, a Java runtime 9 is required to be on a project’s build path to compile a modular project against the system modules.

  • When a Java Runtime 9 is added to a project’s build path, the system modules are listed under the System library in the package explorer

java9 package explorer
  • An existing non-modular Java project can be quickly converted to a module by creating a module-info.java for that project. This feature can be availed once the project has been moved to compliance 9

java9 create module
  • With Java 9 support, a library or a container can now be added to the module path as opposed to the classpath

java9 module path
  • Once a module has been added to a project’s module path, its encapsulation properties can further be modified by clicking on the Is Modular option and editing the Module properties. The following example shows how module module.one can can be made to export its packages in the context of the current Java project

java9 module properties
  • Java search now includes a new search scope - Module

java9 module search

Support for JUnit 5

JUnit 5 support is now available in Eclipse.

  • Create a new JUnit Jupiter test via *New JUnit Test Case wizard:

new junit jupiter test
  • Add JUnit 5 library to the build path

    • New JUnit Test Case wizard offers to add it while creating a new JUnit Jupiter test

add junit 5 lib
  • Quick Fix (Ctrl+1) proposal on @Test, @TestFactory, @ParameterizedTest and @RepeatedTest annotations

add junit 5 lib quick fix
  • Add JUnit library in Java Build Path dialog

add junit 5 lib java build path
  • Create a JUnit Jupiter test method with the new test_jupiter template

junit jupiter test method template
  • Create a @TestFactory method with the new test_factory template

junit jupiter test factory template
  • JUnit Jupiter’s Assertions, Assumptions, DynamicContainer and DynamicTest classes are now added to Eclipse Favorites by default

content assist favorites

This allows you to quickly import the static methods from these classes in your code via Content Assist (Ctrl + Space) and Quick Fix (Ctrl + 1).

  • View all the failures from grouped assertions in the same Result Comparison dialog opened from JUnit view

grouped assertions result comparison
  • View the number of disabled tests and tests with assumption failures on hover in JUnit view

skipped tests
  • Use Go to File action or just double-click to navigate to the test from JUnit view even when the test is displayed with a custom name

display name
  • (Re-)Run a single @Nested test class by using the Run action in JUnit view or Outline view. You can even right-click on a nested test class name in the editor and use the Run As action

run nested class
  • The Test Method Selection dialog in JUnit launch configuration now shows the method parameter types also

test method selection dialog
  • You can provide tags to be included in or excluded from a test run in the Configure Tags dialog of JUnit launch configuration

junit tags
  • If you are using an Eclipse workspace where you were running your JUnit 5 tests via @RunWith(JUnitPlatform.class) in Eclipse without JUnit 5 support then you will have JUnit 4 as the test runner in their launch configurations. Before executing these tests in Eclipse with JUnit 5 support, you should either change their test runner to JUnit 5 or delete them so that new launch configurations are created with JUnit 5 test runner while running the tests

test runner update

We do not support running tests in a setup where an old Eclipse build (not having JUnit 5 support) is using a new Eclipse build (having JUnit 5 support) as target. Also, developers who have the JDT JUnit runtime bundles (org.eclipse.jdt.junit.runtime, org.eclipse.jdt.junit4.runtime) checked out and pull the latest changes will run into the above issue. You are expected to use a new Eclipse build for the development.

And more…​

You can find more noteworthy updates in on this page.

What is next?

Having JBoss Tools 4.5.1 and Developer Studio 11.1 out we are already working on the next maintenance release for Eclipse Oxygen.

Enjoy!

Jeff Maury

Happy to announce 4.5.1.AM3 (Developer Milestone 3) build for Eclipse Oxygen.1.

Downloads available at JBoss Tools 4.5.1 AM3.

What is New?

Full info is at this page. Some highlights are below.

OpenShift.io

OpenShift.io login

It is possible to login from JBoss Tools to OpenShift.io. A single account will be maintained per workspace. Once you initially logged onto OpenShift.io, all needed account information (tokens,…​) will be stored securely.

There are two ways to login onto OpenShift.io:

  • through the UI

  • via a third party service that will invoke the proper extension point

UI based login to OpenShift.io

In the toobar, you should see a new icon Toolbar. Click on it and it will launch the login.

If this is the first time you login to OpenShift.io or if you OpenShift.io account tokens are not valid anymore, you should see a browser launched with the following content:

osio browser

Enter your RHDP login and the browser will then auto-close and an extract (for security reasons) of the OpenShift.io token will be displayed:

osio token dialog

This dialog will be also shown if an OpenShift.io account was configured in the workspace and the account information is valid.

Via extension point

The OpenShift.io integration can be invoked by a third party service through the org.jboss.tools.openshift.io.code.tokenProvider extension point. This extension point will perform the same actions as the UI but basically will return an access token for OpenShift.io to the third party service. A detailed explanation of how to use this extension point is described here: Wiki page

You can display the account information using the Eclipse Jboss Tools → OpenShift.io preference node. If you workspace does not contain an OpenShift.io account yet, you should see the following:

osio preferences

If you have a configured OpenShift.io account, you should see this:

osio preferences1

CDK 3.2 Beta Server Adapter

A new server adapter has been added to support the next generation of CDK 3.2. This is Tech Preview in this release as CDK 3.2 is Beta. While the server adapter itself has limited functionality, it is able to start and stop the CDK virtual machine via its minishift binary. Simply hit Ctrl+3 (Cmd+3 on OSX) and type CDK, that will bring up a command to setup and/or launch the CDK server adapter. You should see the old CDK 2 server adapter along with the new CDK 3 one (labeled Red Hat Container Development Kit 3.2+ ).

cdk3.2 server adapter

All you have to do is set the credentials for your Red Hat account, the location of the CDK’s minishift binary file, the type of virtualization hypervisor and an optional CDK profile name.

cdk3.2 server adapter1

Once you’re finished, a new CDK Server adapter will then be created and visible in the Servers view.

cdk3.2 server adapter2

Once the server is started, Docker and OpenShift connections should appear in their respective views, allowing the user to quickly create a new Openshift application and begin developing their AwesomeApp in a highly-replicatable environment.

cdk3.2 server adapter3
cdk3.2 server adapter4
This is Tech Preview. The implementation is subject to change, may not work with next releases of CDK 3.2 and testing has been limited.

Fuse Tooling

Global Beans: improve support for Bean references

It is now possible to set Bean references from User Interface when creating a new Bean:

Create Factory Bean Reference

Editing Bean references is also now available on the properties view when editing an existing Bean:

Edit Factory Bean Reference

Additional validation has been added to help users avoid mixing Beans defined with class names and Beans defined referencing other beans.

Enjoy!

Jeff Maury

JBoss Tools 4.5.3.AM3 for Eclipse Oxygen.3

by Jeff Maury on Mar 27, 2018.

JBoss Tools 4.5.3.AM2 for Eclipse Oxygen.3

by Jeff Maury on Mar 06, 2018.

Integration Tooling for Eclipse Oxygen

by Paul Leacu on Feb 16, 2018.

JBoss Tools 4.5.3.AM1 for Eclipse Oxygen.2

by Jeff Maury on Feb 13, 2018.

Tuning rsync environment on Windows

by Jeff Maury on Jan 31, 2018.

Looking for older posts ? See the Archived entries.
back to top